Machinery – The Supply of Machinery (Safety) Regulations
Low Voltage – The Electrical Equipment (Safety) Regulations
EMC – Electromagnetic Compatibility Regulations
Pressure Equipment – The Pressure Equipment (Safety) Regulations
ATEX – The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations
Machinery Directive – 2006/42/EC
Low Voltage Directive – 2014/68/EU
EMC Directive – 2014/35/EU
PED Directive – 2014/68/EU
ATEX Directive – 2014/34/EU
KEY MACHINERY STANDARDS / DESIGNATED STANDARDS
- ISO 13850: 2015 Emergency stop function
- ISO 13851: 2019 Two hand control devices
- ISO 13854: 2019 Minimum gaps to avoid crushing of parts of the human body
- ISO 13855: 2010 Positioning of safeguards with respect to approach speeds of parts of the human body
- ISO 13856: 2013 Pressure sensitive protection devices
- ISO 13857: 2010 Safety distances to prevent hazard zones being reached by upper and lower limbs
- ISO 13849 1: 2015 Safety related parts of control systems design and verification
- ISO 13849 2: 2012 Safety related parts of control systems validation
- IEC 62061: 2005+2015 A2 Safety related electrical control systems
- ISO 14118: 2018 Prevention of unexpected startup
- IEC 60204 1: 2018 Electrical equipment of machines
- ISO 4413: 2010 Hydraulic fluid power
- ISO 4414: 2010 Pneumatic fluid power
- ISO 14119: 2013 Interlocking devices associated with guards
- ISO 14120: 2015 Guards (Fixed and moveable)
A full list of Designated Standards can be found here
BREXIT & UKCA MARK
As the UK is no longer in the EU, CE marking is no longer be recognised within the UK, however there is a transition period where the CE Mark will be recognised as a valid form of conformity. This transition period ends on the 31/12/2021.
Instead a new mark will be required in the UK to replace the CE Mark. This will be the UKCA Mark (United Kingdom Conformity Assessed). The CE marking is still required for the EU market. You will be able place the UKCA and CE marking on a product simultaneously if it is destined for both markets. The UKCA Mark is subject to parliamentary approval.
The process for applying the UKCA Mark would mirror that of applying the CE Mark, however the UKCA Mark will be limited to the UK market. Changes will include:
- Directives will be replaces with Statutory Instruments (SI).
- Harmonised Standards being called Designated Standards and the UK will hold a list of these Designated Standards, however there is no additional information available on how this will work at this time.
- Notified Bodies changing to UK Conformity Assessment Bodies.
- Declaration of Conformity changing to UK Declaration of Conformity and will reference UK statutory instrument compliance Plus amendments, applied Designated Standards and a UK Approved Body if applicable.
Important items to note are:
- UK Notified Body accreditation will be withdrawn and their CE Marking will no longer be valid for products placed on the EU market.
- The authorised person responsible for compiling the Technical File must be resident in the UK.
CE Marked goods, such as self-declared machinery that meet EU requirements (where these match UK requirements) can continue to be placed on the UK market until 1st January 2022 where EU and UK requirements remain the same. Goods placed on the UK market after this date must be supplied with a UK Declaration of Conformity and the UKCA Mark on the manufacturers name plate. The key phrase is ‘placed on the UK market’.