Safemach Safety Ltd.
Menu
← All insights

20 November 2026

DSEAR Assessment: What It Covers and Who Needs One

DSEAR Assessment: What It Covers and Who Needs One

Safety engineer reviewing dust extraction equipment in a clean industrial facility

If your site uses flammable liquids, gases or combustible dust, you may have duties under DSEAR, even if chemicals are not your main business. A DSEAR assessment helps you understand where dangerous substances could create a fire or explosion risk, who might be harmed and what practical controls are needed.

This guide explains what the assessment covers, how it relates to ATEX, who should consider one and when to review it.

What does DSEAR require?

DSEAR is short for the Dangerous Substances and Explosive Atmospheres Regulations 2002. The regulations require employers and the self-employed to assess and control risks to people from dangerous substances at work. Depending on the substances and circumstances, those risks may include fires, explosions and similar energetic events.

The duty is to eliminate or reduce risks so far as is reasonably practicable. In practice, that means considering the substances on site, how and where they are used or stored, the possibility of an explosive atmosphere forming, potential ignition sources and the consequences if an incident occurs.

The HSE’s DSEAR guidance sets out the legal framework. A DSEAR assessment should also fit into your wider workplace risk-management arrangements, rather than sitting on a shelf as a standalone report.

How does DSEAR relate to ATEX?

DSEAR and ATEX are connected, but they are not interchangeable terms.

  • DSEAR sets workplace duties for assessing and controlling risks from dangerous substances and explosive atmospheres. It implements the workplace requirements associated with ATEX 137 (Directive 1999/92/EC) in Great Britain.
  • ATEX equipment requirements concern equipment intended for use in potentially explosive atmospheres. The European equipment directive is 2014/34/EU, historically known as ATEX 95.

In short, DSEAR is about managing risks in the workplace; ATEX equipment requirements relate to the design and supply of equipment intended for hazardous areas. Choosing suitable equipment is one part of managing DSEAR risks. It does not replace the workplace assessment.

Who needs a DSEAR assessment?

The key question is not whether your business is a “chemical site”. It is whether dangerous substances are present, or could be present, in a way that could put people’s safety at risk.

That can apply across manufacturing, food and drink, warehousing, paper and plastics, automotive and other industrial settings. Common examples include:

  • Solvents, paints, inks, coatings and flammable cleaning products.
  • Spray booths, paint mixing and powder-coating operations.
  • LPG, hydrogen, fuel storage and flammable gases.
  • Combustible dusts such as flour, sugar, wood, plastic and some metal powders.
  • Dust extraction systems, filters, silos, hoppers and enclosed conveyors.
  • Waste materials or residues that can release flammable vapours or dust.

The risk depends on the substance and the way it is handled. A product used in small quantities may still need consideration if it can form an explosive atmosphere in a poorly ventilated area, for example. Processes such as cleaning, maintenance, filling and emptying can also create risks that are not obvious during routine production.

Engineer inspecting extraction ducts in a food powder processing environment

What does a DSEAR risk assessment cover?

A competent assessment looks beyond a list of chemicals. It considers the substances’ hazardous properties, the work being done and the conditions in which substances could be released, dispersed or ignited.

It will typically examine:

  • Safety data and substance properties, including how much is used or stored.
  • Processes and tasks, including foreseeable maintenance and cleaning.
  • Possible release points, leaks, spills, dust deposits and ventilation.
  • Whether an explosive atmosphere could form, and how long it might persist.
  • Potential ignition sources, including electrical or mechanical equipment, hot surfaces, static electricity and hot work.
  • Who may be exposed and the likely consequences of a fire or explosion.
  • Existing controls and whether they are effective.

Where an explosive atmosphere may occur, the assessment may include hazardous area classification. Zones describe how likely an explosive atmosphere is to occur and how long it may persist:

Atmosphere Zone General meaning
Gas, vapour or mist 0 Present continuously, for long periods or frequently
Gas, vapour or mist 1 Likely to occur occasionally in normal operation
Gas, vapour or mist 2 Not likely in normal operation; if it occurs, it persists briefly
Combustible dust 20 Present continuously, for long periods or frequently
Combustible dust 21 Likely to occur occasionally in normal operation
Combustible dust 22 Not likely in normal operation; if it occurs, it persists briefly

A completed assessment should give you a documented record of the significant findings, relevant zone information where needed, and practical actions to prevent or control risk. Measures might include reducing releases, improving ventilation or housekeeping, controlling ignition sources, selecting suitable equipment, and providing appropriate information, instruction and training.

What happens during an on-site assessment?

An assessor will usually speak with people who understand the process, review relevant substance information and walk the areas where materials are received, stored, used or extracted. They may look at plant, ventilation, dust deposits, equipment, maintenance arrangements and activities such as cleaning or hot work.

The point is to understand how the site actually operates, not just what is shown on a drawing. An assessor should explain findings in a way that helps duty holders prioritise and implement actions. The assessment should be carried out by someone with the competence and experience appropriate to the risks.

The link between DSEAR and LEV

Extraction systems can be relevant to both exposure control and explosion risk. For example, dust extraction may help prevent combustible dust from accumulating in the workplace, but the system itself also needs to be considered as part of the process and risk assessment.

LEV testing is a separate requirement under COSHH, not a substitute for a DSEAR assessment. Safemach provides LEV testing to examine extraction systems, including hoods, filters and ducts. The findings can help you understand whether the system is performing as intended, while DSEAR considers the wider fire and explosion risks associated with the substance and process.

Industrial paint spray booth with ventilation grilles and a technician checking controls

Three common misconceptions

“We’re not a chemical site, so DSEAR doesn’t apply.”
DSEAR is relevant wherever dangerous substances could create a risk to people. Combustible dust, fuels, solvents and gases can be present in many everyday industrial processes.

“Our COSHH assessment covers it.”
COSHH and DSEAR address different hazards. COSHH focuses on risks to health from hazardous substances; DSEAR focuses on fire, explosion and related risks from dangerous substances. There may be useful overlap in the information you gather, but one assessment does not automatically fulfil the other duty.

“We have ATEX-rated equipment, so we’re compliant.”
Equipment selection matters, but it is only one element. You still need to assess the workplace risks, consider whether areas need to be classified, control releases and ignition sources, and document and review the arrangements.

How often should you review a DSEAR assessment?

There is no single review interval that suits every workplace. DSEAR requires the assessment to be reviewed regularly and kept up to date. Particularly if there is reason to think it is no longer valid or if there has been a significant change.

Review it when you:

  • Introduce a new substance, process, machine or extraction system.
  • Change quantities, operating conditions, layout or ventilation.
  • Modify equipment or the way a task is carried out.
  • Have an incident, near miss or unexpected release.
  • Identify that a control measure is not working as intended.

A planned review schedule is useful, but it should not delay a review after a meaningful change. If the site is stable, the appropriate routine interval still depends on the hazards and how likely changes are; there is no universal statutory “every X years” rule for all DSEAR assessments.

Turn findings into safer controls

A DSEAR assessment is most useful when it leads to clear, manageable actions. Safemach supports businesses with DSEAR and ATEX assessments, alongside the engineering, supply and installation of protective measures that may follow. We can also help with LEV testing and wider machinery compliance work, including PUWER inspections.

If you are unsure whether a process or substance on your site needs assessment, contact Safemach to discuss your requirements.